Sorry, but the cart item could not be found!

Save/Share Design

A unique URL to save and share your design will be created for you...

Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs)


$74.99


  • Turnaround times are now only 2-3 business days which does not include shipping times mentioned at checkout! Everything is made to order here in Dallas, TX USA! 


  • We can tailor any design to your exact GPU Model! If your card has a vent pass through for cooling, we will make a cutout for this so there is no effect on your GPUs temperatures. Mounting is made super simple with included double-sided tape and nonconductive magnets!

    All RGB Backplates include a 20 inch (50cm) long 5V 3Pin Addressable Header Cable.

    Let us know which areas you want us to make glow RGB! All areas will be made semi-transparent and backlit over our LED reactive white sublimation. We do not cut out or engrave areas to be clear anymore as it's not as bright as our new method. If you would like us to change the specific color area to white, please let us know, otherwise mention to keep the color of the specified area the same. 

    +$10 for each revision.

    • 9.99 $
    • 19.99 $
    • 9.99 $
Or Check this box to Enter Your GPU Model Manually, Provide a link to your GPU, or Provide LxW dimensions

Memorial Day Sale | Use Code: 30on30 At Checkout

days
0
0
hours
0
7
minutes
0
9
seconds
0
3

Our GPU Backplates have no effect on temps. Watch this video below by Tek Vibe with in-depth testing for more info!

1) To install your V1 Tech Custom Graphics Card Backplate, we recommend first removing the graphics card from your PC. 2) If you opt to use the provided magnets for an easily removable installation, first apply the provided double-sided tape to one side of the magnets by peeling the protective plastic on the tape and sticking the tape directly to the magnet. Place the magnets onto the tallest screws* on the back of your graphics card with the tape facing away from the graphics card. If a semi-permanent installation is desired, apply the provided double-sided tape directly to the tallest screws* on the back of your graphics card.

*Note: Ensure that as much surface area is covered as possible, start with the far corners of the graphics card and evenly distribute magnets/adhesive as you work inward to ensure that as much surface area is covered as possible for a secure installation.

3) Peel the protective plastic on the other side of the double-sided tape and position the V1 Tech Custom. Graphics Card Backplate directly over the rear of your graphics card (double-check to ensure that the backplate is oriented the correct way by aligning with any SLI or PCIe power cutouts if present. Press down firmly to secure in place. Install your graphics card into your system.

All our RGB Mod Parts come with this connector on the cable by default. See below options on how to power/control the LEDs.

Option 1 (Included): Connect the RGB Cable directly into your motherboards 3 Pin 5V RGB Header, Razer Chroma Addressable RGB Controller, EKWB D-RGB Loop Connect, or your own 5v 3Pin Controller. Make sure not to connect to a 12V 4 pin header, as that will kill the LEDs.

Option 2 (Optional/Sold Separately): To use the RF remote to control your LEDs simply connect the SATA Power Cable to any SATA Power cable from your power supply unit. Connect the other side to the LED connector.

  

Option 3 (Optional/Sold Separately): To use Corsair iCUE to control and power your LEDs, simply connect the Corsair iCUE cable adapter to the RGB Cable, and then plug in the adapter into a Corsair Commander Pro or Corsair Node Pro unit. Connect the other side to the LED connector. In Corsair iCUE’s software make sure to set the product to *2 LED STRIPS* as ours are denser!

Option 4 (Optional/Sold Separately): Connect to a Gigabyte/Aorus Motherboard Fusion 5V 3 Pin VDG Header. Connect the other side to the LED connector.

 

GPU Backplate, double-sided tape, and nonconductive magnets.

Optional: A-RGB remote(SATA Powered)/, Corsair iCUE cable, & Gigabyte Fusion VDG Cable

Share your thoughts!

4.69 out of 5 stars

70 reviews

Let us know what you think...

Only logged in customers who have purchased this product may leave a review.

What others are saying

  1. 2nd panel - 100% satisfaction

    cpatrick.fox (verified owner) on Custom Design RGB PSU Shroud Cover

    2nd panel

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. brenttaylor90 (verified owner) on Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs)

    Trevor From castlevania. turned out sicccckkkk

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. Awesome addition

    cpatrick.fox (verified owner) on Custom Design RGB PSU Shroud Cover

    Perfect fabrication to my specs and graphics. Very fast fulfillment. Extreme care given to packaging

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. 4 out of 32 people found this helpful

    Amazing quality!

    midianad (verified owner) on Custom Design AIO Cover for Corsair iCUE ELITE CAPELLIX (H100i, H115i, H150i) Black and White

    Product arrived without any issues. Quality is AAA with a perfectly cut plate for your water pump. The print quality is also top notch. Reason why other people get lower-quality prints is because they’re using a low dpi image. Mine was 300dpi and it came out flawless. These guys print exactly what you sent them so make sure your image is High dpi or you’re going to get a blurry or pixelated print.

    (4) (28)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. 5 out of 5 people found this helpful

    god_smack (verified owner) on Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs)

    I am really impressed by the image quality and it is perfectly cut to fit the GPU.
    I placed another order as soon as it arrived.
    Great job V1 Tech

    (5) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Continue as a Guest

Don't have an account? Sign Up

All orders are custom made to order in Dallas, TX USA!

Our inventory is in stock and production has been scaled up a lot thanks to you! Turnaround times are currently under 7 days which does not include shipping times mentioned at checkout!

You will receive an automatic email with tracking once your package has shipped!

Watch the full “V1 Tech Custom Designer Guide” with real examples and see how it’s made!