Skip to content
    • M- F 9am-6pm CST
    • 214-501-1484
  • Happy Pride Month! | Use Code: pride16 at Checkout for 16% OFF!

    days
    0
    0
    hours
    0
    5
    minutes
    4
    2
    seconds
    0
    5
  • Happy Pride Month! | Use Code: pride16 at Checkout for 16% OFF!

    days
    0
    0
    hours
    0
    5
    minutes
    4
    2
    seconds
    0
    5
V1 TechV1 Tech
  • Menu
    • No products in the cart.

  • Checkout +
  • Login
  • Cart

    No products in the cart.

  • Wall Art
  • Backplates
  • Support Brackets
  • Fan Grills
    • 1 Fan (120/140mm)
    • 2 Fans (240/280mm)
    • 3 Fans (360/420mm)
    • 4 Fans (480/560mm)
  • Case Panels
  • ARGB Cables
  • AIO Covers
    • Corsair AIO Covers
    • Cooler Master AIO Covers
    • Lian Li Galahad AIO Covers
    • DeepCool Castle AIO Covers
    • EK-AIO
    • ASUS ROG Strix AIO Covers
    • MSI AIO Covers
    • NXT Kraken AIO Covers
  • Drive Covers
    • M.2 Heat Sink Covers
    • SSD Cover – Horizontal Layout
    • SSD Cover – Vertical Layout
    • HDD Cover – Vertical Layout
    • HDD Cover – Horizontal Layout
  • Accessories
  • Create Your Own
    • Wall Art
    • GPU Backplate
    • GPU Support Bracket
    • AIO Cover
    • Fan Grill
    • PSU Shroud Cover
    • SSD/HDD Drive Cover
  • Gift Card
  • VIP
  • Contact Us

  • Install Guide
  • What is Included
  • Reviews (156)
  • Shipping

Our GPU Backplates have no effect on temps. Watch this video below by Tek Vibe with in-depth testing for more info!

1) To install your V1 Tech Custom Graphics Card Backplate, we recommend first removing the graphics card from your PC. 2) If you opt to use the provided magnets for an easily removable installation, first apply the provided double-sided tape to one side of the magnets by peeling the protective plastic on the tape and sticking the tape directly to the magnet. Place the magnets onto the tallest screws* on the back of your graphics card with the tape facing away from the graphics card. If a semi-permanent installation is desired, apply the provided double-sided tape directly to the tallest screws* on the back of your graphics card.

*Note: Ensure that as much surface area is covered as possible, start with the far corners of the graphics card and evenly distribute magnets/adhesive as you work inward to ensure that as much surface area is covered as possible for a secure installation.

3) Peel the protective plastic on the other side of the double-sided tape and position the V1 Tech Custom. Graphics Card Backplate directly over the rear of your graphics card (double-check to ensure that the backplate is oriented the correct way by aligning with any SLI or PCIe power cutouts if present. Press down firmly to secure in place. Install your graphics card into your system.

All our RGB Mod Parts come with this connector on the cable by default. See below options on how to power/control the LEDs.

Option 1 (Included): Connect the RGB Cable directly into your motherboards 3 Pin 5V RGB Header, Razer Chroma Addressable RGB Controller, EKWB D-RGB Loop Connect, or your own 5v 3Pin Controller. Make sure not to connect to a 12V 4 pin header, as that will kill the LEDs.

Option 2 (Optional/Sold Separately): To use the RF remote to control your LEDs simply connect the SATA Power Cable to any SATA Power cable from your power supply unit. Connect the other side to the LED connector.

  

Option 3 (Optional/Sold Separately): To use Corsair iCUE to control and power your LEDs, simply connect the Corsair iCUE cable adapter to the RGB Cable, and then plug in the adapter into a Corsair Commander Pro or Corsair Node Pro unit. Connect the other side to the LED connector. In Corsair iCUE’s software make sure to set the product to *2 LED STRIPS* as ours are denser!

Option 4 (Optional/Sold Separately): Connect to a Gigabyte/Aorus Motherboard Fusion 5V 3 Pin VDG Header. Connect the other side to the LED connector.

 

GPU Backplate, double-sided tape, and nonconductive magnets.

Optional: A-RGB remote(SATA Powered)/, Corsair iCUE cable, & Gigabyte Fusion VDG Cable

Share your thoughts!

4.65 out of 5 stars

156 reviews

5 135
4 9
3 5
2 0
1 0

Let us know what you think...

Leave a Review Post a Photo

Only logged in customers who have purchased this product may leave a review. Log in now

What others are saying

  1. V1tech is amazing and you should buy from them

    xenocruxis (verified owner) on Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs) – May 31, 2022

    Shout out to V1tech for not only letting me create my dream pc artwork but for having such amazing customer service. I am super excited and happy for them doing everything I wanted. I highly recommend them for anything you need pc backplate-wise. <3

    TY AGAIN V1TECH

    (0) (0) Watch Unwatch

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. Rated 5 out of 5
    AMAZING!

    kylez (verified owner) on Dark Side RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs) – May 27, 2022

    V1tech products just keep getting better and better.

    I got an RGB backplate a few years ago and the quality is soo much higher now. The cutting on the acrylic is better, And the quality of the print is better, Also with a nice textured back now which gives it that even more premium feel.

    The products sync up nicely with a splitter cable plugged into a 3pin5v connector on the motherboard. (Had the RGB backplate with the matching RGB support bracket.)

    The only thing I can say that could be added to the support bracket is to put some sort of texture material so it sticks better to the GPU

    (0) (0) Watch Unwatch

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. Rated 5 out of 5

    Andrew Fletcher (verified owner) on Purple Storm RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs) – April 29, 2022

    After going over all the different options I decided on the Purple Storm GPU backplate and I couldn’t be happier. I also got the AIO cover for my Cooler Master MasterLiquid ML360 Mirror ARGB which isn’t on the list of the supported AIO covers, but after removing the inner mirror piece on the AIO cover it ended up working perfectly. I then went with the Kanto Ghosts AIO support bracket and couldn’t be happier with the outcome!

    (0) (0) Watch Unwatch

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. Rated 5 out of 5

    Andrew Fletcher (verified owner) on Soul of the Demon Sister RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs) – April 29, 2022

    I purchased the GPU backplate and support bracket as a gift for my girlfriend and she absolutely loved them! They shipped extremely fast and were very easy to put on. She loved them so much she bought the AIO cover and PSU cover to finish her themed build! I highly recommend V1 Tech!

    (0) (0) Watch Unwatch

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. Rated 5 out of 5

    Michael Pham (verified owner) on Night Cruise RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs) – April 28, 2022

    Came faster than I expected! Bought this backplate for my MSI 3070 Trio, the install was a breeze as they give you directions to follow, even without, it’s simple enough to install. It looks amazing and is easy to change the colors as I already had the MSI Center App. They sent emails from the confirmation, when they completed the backplate and the tracking number for shipping. I debated on whether or not to get the GPU Sag Support Bracket but figured not to since I have an O11D Mini and the gpu fans are centimeters away from the intake fans, so I actually didn’t have room unfortunately. Next is an AIO Cooler to clean up the bulky cpu fan and obviously an AIO Cover from V1 Tech 🙂

    (0) (0) Watch Unwatch

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

1 2 3 … 31 →
×

Login

Lost your password?

Register

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Continue as a Guest

Already have an account? Log In

Don't have an account? Sign Up

Continue as a Guest

All orders are custom made to order in Dallas, TX USA!

Our inventory is in stock and production has been scaled up a lot thanks to you! Turnaround times are currently under 7 days which does not include shipping times mentioned at checkout!

You will receive an automatic email with tracking once your package has shipped!

Night Cruise RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs)

Designed by Artist: Nogar007


$64.99


  • We can tailor any design to your exact GPU Model! If your card has a vent pass through for cooling, we will make a cutout for this so there is no effect on your GPUs temperatures. Mounting is made super simple with included double-sided tape and nonconductive magnets!

    All RGB Backplates include a 20 inch (50cm) long 5V 3Pin Addressable Header Cable.

    • -9.99 $
    • $
    • $
    • 45 $
    • 19.99 $
    • 8.99 $
    • 8.99 $
    • 3.99 $
    • 19.99 $
    • 8.99 $
  • Turnaround times are now only 2-3 business days which does not include shipping times mentioned at checkout! Everything is made to order here in Dallas, TX USA! 

Or Check this box to Enter Your GPU Model Manually, Provide a link to your GPU, or Provide LxW dimensions

Happy Pride Month! | Use Code: pride16 at Checkout for 16% OFF!

days
0
0
hours
0
5
minutes
4
2
seconds
0
5

  • Install Guide
  • What is Included
  • Reviews (156)
  • Shipping

Our GPU Backplates have no effect on temps. Watch this video below by Tek Vibe with in-depth testing for more info!

1) To install your V1 Tech Custom Graphics Card Backplate, we recommend first removing the graphics card from your PC. 2) If you opt to use the provided magnets for an easily removable installation, first apply the provided double-sided tape to one side of the magnets by peeling the protective plastic on the tape and sticking the tape directly to the magnet. Place the magnets onto the tallest screws* on the back of your graphics card with the tape facing away from the graphics card. If a semi-permanent installation is desired, apply the provided double-sided tape directly to the tallest screws* on the back of your graphics card.

*Note: Ensure that as much surface area is covered as possible, start with the far corners of the graphics card and evenly distribute magnets/adhesive as you work inward to ensure that as much surface area is covered as possible for a secure installation.

3) Peel the protective plastic on the other side of the double-sided tape and position the V1 Tech Custom. Graphics Card Backplate directly over the rear of your graphics card (double-check to ensure that the backplate is oriented the correct way by aligning with any SLI or PCIe power cutouts if present. Press down firmly to secure in place. Install your graphics card into your system.

All our RGB Mod Parts come with this connector on the cable by default. See below options on how to power/control the LEDs.

Option 1 (Included): Connect the RGB Cable directly into your motherboards 3 Pin 5V RGB Header, Razer Chroma Addressable RGB Controller, EKWB D-RGB Loop Connect, or your own 5v 3Pin Controller. Make sure not to connect to a 12V 4 pin header, as that will kill the LEDs.

Option 2 (Optional/Sold Separately): To use the RF remote to control your LEDs simply connect the SATA Power Cable to any SATA Power cable from your power supply unit. Connect the other side to the LED connector.

  

Option 3 (Optional/Sold Separately): To use Corsair iCUE to control and power your LEDs, simply connect the Corsair iCUE cable adapter to the RGB Cable, and then plug in the adapter into a Corsair Commander Pro or Corsair Node Pro unit. Connect the other side to the LED connector. In Corsair iCUE’s software make sure to set the product to *2 LED STRIPS* as ours are denser!

Option 4 (Optional/Sold Separately): Connect to a Gigabyte/Aorus Motherboard Fusion 5V 3 Pin VDG Header. Connect the other side to the LED connector.

 

GPU Backplate, double-sided tape, and nonconductive magnets.

Optional: A-RGB remote(SATA Powered)/, Corsair iCUE cable, & Gigabyte Fusion VDG Cable

Share your thoughts!

4.65 out of 5 stars

156 reviews

5 135
4 9
3 5
2 0
1 0

Let us know what you think...

Leave a Review Post a Photo

Only logged in customers who have purchased this product may leave a review. Log in now

What others are saying

  1. V1tech is amazing and you should buy from them

    xenocruxis (verified owner) on Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs) – May 31, 2022

    Shout out to V1tech for not only letting me create my dream pc artwork but for having such amazing customer service. I am super excited and happy for them doing everything I wanted. I highly recommend them for anything you need pc backplate-wise. <3

    TY AGAIN V1TECH

    (0) (0) Watch Unwatch

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. Rated 5 out of 5
    AMAZING!

    kylez (verified owner) on Dark Side RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs) – May 27, 2022

    V1tech products just keep getting better and better.

    I got an RGB backplate a few years ago and the quality is soo much higher now. The cutting on the acrylic is better, And the quality of the print is better, Also with a nice textured back now which gives it that even more premium feel.

    The products sync up nicely with a splitter cable plugged into a 3pin5v connector on the motherboard. (Had the RGB backplate with the matching RGB support bracket.)

    The only thing I can say that could be added to the support bracket is to put some sort of texture material so it sticks better to the GPU

    (0) (0) Watch Unwatch

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. Rated 5 out of 5

    Andrew Fletcher (verified owner) on Purple Storm RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs) – April 29, 2022

    After going over all the different options I decided on the Purple Storm GPU backplate and I couldn’t be happier. I also got the AIO cover for my Cooler Master MasterLiquid ML360 Mirror ARGB which isn’t on the list of the supported AIO covers, but after removing the inner mirror piece on the AIO cover it ended up working perfectly. I then went with the Kanto Ghosts AIO support bracket and couldn’t be happier with the outcome!

    (0) (0) Watch Unwatch

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. Rated 5 out of 5

    Andrew Fletcher (verified owner) on Soul of the Demon Sister RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs) – April 29, 2022

    I purchased the GPU backplate and support bracket as a gift for my girlfriend and she absolutely loved them! They shipped extremely fast and were very easy to put on. She loved them so much she bought the AIO cover and PSU cover to finish her themed build! I highly recommend V1 Tech!

    (0) (0) Watch Unwatch

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. Rated 5 out of 5

    Michael Pham (verified owner) on Night Cruise RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs) – April 28, 2022

    Came faster than I expected! Bought this backplate for my MSI 3070 Trio, the install was a breeze as they give you directions to follow, even without, it’s simple enough to install. It looks amazing and is easy to change the colors as I already had the MSI Center App. They sent emails from the confirmation, when they completed the backplate and the tracking number for shipping. I debated on whether or not to get the GPU Sag Support Bracket but figured not to since I have an O11D Mini and the gpu fans are centimeters away from the intake fans, so I actually didn’t have room unfortunately. Next is an AIO Cooler to clean up the bulky cpu fan and obviously an AIO Cover from V1 Tech 🙂

    (0) (0) Watch Unwatch

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

1 2 3 … 31 →
×

Login

Lost your password?

Register

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Continue as a Guest

Already have an account? Log In

Don't have an account? Sign Up

Continue as a Guest

All orders are custom made to order in Dallas, TX USA!

Our inventory is in stock and production has been scaled up a lot thanks to you! Turnaround times are currently under 7 days which does not include shipping times mentioned at checkout!

You will receive an automatic email with tracking once your package has shipped!

Product categories
  • AIO Covers
    • ASUS ROG Strix LC
    • Cooler Master AIO Covers
      • Cooler Master MasterLiquid MLL
      • Cooler Master MasterLiquid MLR
      • Cooler Master ML Mirror
    • Corsair AIO Covers
      • Corsair Hydro Series AIO Covers
      • Corsair iCUE ELITE CAPELLIX AIO Covers
    • DeepCool Castle
    • EKWB AIO Covers
    • LIAN LI GALAHAD
      • LIAN LI GALAHAD LARGE
      • LIAN LI GALAHAD SMALL
    • MSI MAG CoreLiquid
    • NXT Kraken
    • Thermaltake
  • Backplates
  • Cables and Combs
  • Case Panels
    • Lian Li Case Panels
      • O11 Dynamic
        • Bottom Panel Plate Cover
        • Rear Panel Plate Cover
    • PSU Shroud Side Covers
  • Clothing
  • Create Your Own Design
    • AIO Covers
    • Fan Grills
    • GPU Backplate
    • GPU Sag Support Bracket
    • PSU Shroud Panel Cover
    • SSD & HDD Drive Covers
  • Drive Covers (SSD & HDD)
    • HDD Cover Horizontal
    • HDD Covers Vertical
    • M.2 Heatsink Cover
    • SSD Cover Vertical
    • SSD Covers Horizontal
  • Fan Grills
    • 1 Fan (120/140mm)
      • Flow
      • Windmill
    • 2 Fan (240/280mm)
      • Flow
        • Horizontal
        • Vertical
      • Windmill
        • Hoizontal
        • Vertical
    • 3 Fan (360/420mm)
      • Flow
        • Horizontal
        • Vertical
      • Windmill
        • Horizontal
        • Vertical
    • 4 Fan (480/560mm)
      • Flow
        • Horizontal
        • Vertical
      • Windmill
        • Horizontal
        • Vertical
  • GPU Sag Support Brackets
  • Parts & Accessories
  • Store Credit / Gift Card
  • Wall Art
    • Custom Design Wall Art
    • Horizontal Wall Art
      • 2 Panel Horizontal Wall Art
      • 3 Panel Horizontal Wall Art
    • Square Wall Art Square
    • Vertical Wall Art
      • 2 Panel Vertical Wall Art
      • 3 Panel Vertical Wall Art
      • 4 Panel Vertical Wall Art
      • 5 Panel Vertical Wall Art

Dallas, TX

Product Categories
  • Wall Art
  • GPU Backplates
  • GPU Support Brackets
  • Fan Grills
  • Case Panels
  • ARGB Cables
  • AIO Covers
  • Drive Covers
  • Accessories
  • Create Your Own
  •  
Info
  • FAQ
  • Shipping and Returns
  • Contact Us
  • Terms and Conditions
  • Privacy Policy
Newsletter

Sign-up for our latest news and offers! Get a $5 off coupon code for your first purchase in your welcome email!


Newsletter

Sign-up for our latest news and offers! Get a $5 off coupon code for your first purchase in your welcome email!


Dallas, TX

Product Categories
  • Backplates
  • GPU Support Brackets
  • SSD/HDD Covers
  • Sleeved Cables
Info
  • FAQ
  • Shipping and Returns
  • Contact Us
  • Terms and Conditions
  • Privacy Policy
  • Affliate Area
  • Reward Points
Newsletter

Sign-up for our latest news and offers! Get a $5 off coupon code for your first purchase in your welcome email!


Dallas, TX

Product Categories
  • Backplates
  • GPU Support Brackets
  • SSD/HDD Covers
  • Sleeved Cables
Info
  • FAQ
  • Shipping and Returns
  • Contact Us
  • Terms and Conditions
  • Privacy Policy
  • Affliate Area
  • Reward Points
Copyright 2022 © V1 Tech, LLC
  • Wall Art
  • Backplates
  • Support Brackets
  • Fan Grills
    • 1 Fan (120/140mm)
    • 2 Fans (240/280mm)
    • 3 Fans (360/420mm)
    • 4 Fans (480/560mm)
  • Case Panels
  • ARGB Cables
  • AIO Covers
    • Corsair AIO Covers
    • Cooler Master AIO Covers
    • Lian Li Galahad AIO Covers
    • DeepCool Castle AIO Covers
    • EK-AIO
    • ASUS ROG Strix AIO Covers
    • MSI AIO Covers
    • NXT Kraken AIO Covers
  • Drive Covers
    • M.2 Heat Sink Covers
    • SSD Cover – Horizontal Layout
    • SSD Cover – Vertical Layout
    • HDD Cover – Vertical Layout
    • HDD Cover – Horizontal Layout
  • Accessories
  • Create Your Own
    • Wall Art
    • GPU Backplate
    • GPU Support Bracket
    • AIO Cover
    • Fan Grill
    • PSU Shroud Cover
    • SSD/HDD Drive Cover
  • Gift Card
  • VIP
  • Contact Us
  • Login

Login

Lost your password?

Register

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.