Our GPU Backplates have no effect on temps. Watch this video below by Tek Vibe with in-depth testing for more info!

1) To install your V1 Tech Custom Graphics Card Backplate, we recommend first removing the graphics card from your PC. 2) If you opt to use the provided magnets for an easily removable installation, first apply the provided double-sided tape to one side of the magnets by peeling the protective plastic on the tape and sticking the tape directly to the magnet. Place the magnets onto the tallest screws* on the back of your graphics card with the tape facing away from the graphics card. If a semi-permanent installation is desired, apply the provided double-sided tape directly to the tallest screws* on the back of your graphics card.

*Note: Ensure that as much surface area is covered as possible, start with the far corners of the graphics card and evenly distribute magnets/adhesive as you work inward to ensure that as much surface area is covered as possible for a secure installation.

3) Peel the protective plastic on the other side of the double-sided tape and position the V1 Tech Custom. Graphics Card Backplate directly over the rear of your graphics card (double-check to ensure that the backplate is oriented the correct way by aligning with any SLI or PCIe power cutouts if present. Press down firmly to secure in place. Install your graphics card into your system.

All our RGB Mod Parts come with this connector on the cable by default. See below options on how to power/control the LEDs.

Option 1 (Included): Connect the RGB Cable directly into your motherboards 3 Pin 5V RGB Header, Razer Chroma Addressable RGB Controller, EKWB D-RGB Loop Connect, or your own 5v 3Pin Controller. Make sure not to connect to a 12V 4 pin header, as that will kill the LEDs.

Option 2 (Optional/Sold Separately): To use the RF remote to control your LEDs simply connect the SATA Power Cable to any SATA Power cable from your power supply unit. Connect the other side to the LED connector.

  

Option 3 (Optional/Sold Separately): To use Corsair iCUE to control and power your LEDs, simply connect the Corsair iCUE cable adapter to the RGB Cable, and then plug in the adapter into a Corsair Commander Pro or Corsair Node Pro unit. Connect the other side to the LED connector. In Corsair iCUE’s software make sure to set the product to *2 LED STRIPS* as ours are denser!

Option 4 (Optional/Sold Separately): Connect to a Gigabyte/Aorus Motherboard Fusion 5V 3 Pin VDG Header. Connect the other side to the LED connector.

 

GPU Backplate, double-sided tape, and nonconductive magnets.

Optional: A-RGB remote(SATA Powered)/, Corsair iCUE cable, & Gigabyte Fusion VDG Cable

Share your thoughts!

4.65 out of 5 stars

156 reviews

Let us know what you think...

Only logged in customers who have purchased this product may leave a review.

What others are saying

  1. V1tech is amazing and you should buy from them

    xenocruxis (verified owner) on Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs)

    Shout out to V1tech for not only letting me create my dream pc artwork but for having such amazing customer service. I am super excited and happy for them doing everything I wanted. I highly recommend them for anything you need pc backplate-wise. <3

    TY AGAIN V1TECH

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. AMAZING!

    kylez (verified owner) on Dark Side RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs)

    V1tech products just keep getting better and better.

    I got an RGB backplate a few years ago and the quality is soo much higher now. The cutting on the acrylic is better, And the quality of the print is better, Also with a nice textured back now which gives it that even more premium feel.

    The products sync up nicely with a splitter cable plugged into a 3pin5v connector on the motherboard. (Had the RGB backplate with the matching RGB support bracket.)

    The only thing I can say that could be added to the support bracket is to put some sort of texture material so it sticks better to the GPU

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. Andrew Fletcher (verified owner) on Purple Storm RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs)

    After going over all the different options I decided on the Purple Storm GPU backplate and I couldn’t be happier. I also got the AIO cover for my Cooler Master MasterLiquid ML360 Mirror ARGB which isn’t on the list of the supported AIO covers, but after removing the inner mirror piece on the AIO cover it ended up working perfectly. I then went with the Kanto Ghosts AIO support bracket and couldn’t be happier with the outcome!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. Andrew Fletcher (verified owner) on Soul of the Demon Sister RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs)

    I purchased the GPU backplate and support bracket as a gift for my girlfriend and she absolutely loved them! They shipped extremely fast and were very easy to put on. She loved them so much she bought the AIO cover and PSU cover to finish her themed build! I highly recommend V1 Tech!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. Michael Pham (verified owner) on Night Cruise RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs)

    Came faster than I expected! Bought this backplate for my MSI 3070 Trio, the install was a breeze as they give you directions to follow, even without, it’s simple enough to install. It looks amazing and is easy to change the colors as I already had the MSI Center App. They sent emails from the confirmation, when they completed the backplate and the tracking number for shipping. I debated on whether or not to get the GPU Sag Support Bracket but figured not to since I have an O11D Mini and the gpu fans are centimeters away from the intake fans, so I actually didn’t have room unfortunately. Next is an AIO Cooler to clean up the bulky cpu fan and obviously an AIO Cover from V1 Tech 🙂

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Continue as a Guest

Don't have an account? Sign Up

All orders are custom made to order in Dallas, TX USA!

Our inventory is in stock and production has been scaled up a lot thanks to you! Turnaround times are currently under 7 days which does not include shipping times mentioned at checkout!

You will receive an automatic email with tracking once your package has shipped!