No products in the cart.
-33%
Black Dragon Breath RGB SSD – HDD Drive Cover
$59.99 $39.99
1) To install your V1 Tech Drive Cover, apply the provided double-sided tape to the four
corners on the underside* of the V1 Tech Custom Drive cover.
*Note: Applying the provided double-sided tape directly to the V1 Tech Custom 2.5” Drive Cover ensures clearance
with the integrated LED strip if so equipped.
2) Peel the protective plastic on the other side of the double-sided tape and position the V1 Tech Custom
Drive Cover directly over your drive. Press down firmly to secure in place.
2) Peel the protective plastic on the other side of the double-sided tape and position the V1 Tech CustomWith every V1 Tech Addressable RGB Mod Part, we currently include 3 modular methods to power and control your lighting. Method 1: If you wish to control your V1 Tech RGB component with the included RF remote, simply
connect the SATA RF cable to a SATA power cable from your power supply. Connect the other end of
the SATA RF cable to the LED connector on your V1 Tech RGB component.
With every V1 Tech Addressable RGB Mod Part, we currently include 3 modular methods to power and control your lighting. 
Method 1: If you wish to control your V1 Tech RGB component with the included RF remote, simply
Method 2: If you wish to control your V1 Tech RGB component with your motherboard RGB control
software, simply connect the included motherboard 5V cable to an available 3-pin 5V addressable RGB
header* on your motherboard. Connect the other end of the motherboard 5V cable to the LED
connector on your V1 Tech RGB component.
*Note: Please ensure to avoid plugging into a 4-pin 12V non-addressable RGB header, this WILL DAMAGE the LEDs
and could result in damage to your motherboard. Refer to the image below for examples of a 3-pin 5V addressable
RGB header and a 4-pin 12V non-addressable RGB header.
Method 3: If you wish to control your V1 Tech RGB component with the CORSAIR iCUE Software, simply
connect the included CORSAIR iCUE cable to a CORSAIR Commander PRO or Lighting Node PRO.
Connect the other end of the CORSAIR iCUE cable to the LED connector on your V1 Tech RGB
component.
Share your thoughts!
Let us know what you think...
Only logged in customers who have purchased this product may leave a review. Log in now
Dario Ivankovic on Custom Design Solid State Drive Cover –
Ordered a standard non-RGB SSD cover and it was perfect. The top design where the design is added is some sort of a matte finish so it doesn’t scratch easily and finished product is perfect. Thank you for an awesome design and product.
(0) (0) Watch Unwatch
cimonrog on Blue Space RGB SSD - HDD Drive Cover –
Nice and good quality. Sticker are too sticky but other than that happy.
(0) (0) Watch Unwatch
chris.canavan on MSI Dragon Spectrum White RGB SSD - HDD Drive Cover –
Needed something to POP on a red and black build. This SSD cover worked perfect. Including the MSI dragon was just a huge bonus. The Install was simple. The included cables and instructions worked on the first go. Check out additional images on my insta page. “FPSMAFIA”
(1) (0) Watch Unwatch
dtaylor1985 on Custom Design M.2 Drive Cover –
The transfer of the image I chose for the custom ssd cover looks awesome! I only have 1 minor issue. The block itself is larger than my m.2 ssd so it covers the hold down screw, and it’s fairly thick. These are very minor things that bug me but in all honesty, now that it’s in and attached, I don’t really notice.
(1) (0) Watch Unwatch
dreem12 on Custom Design Solid State Drive Cover –
i did order a Sombra HDD and its look so nice in my pc the only issue is ( Dont order the back color Black ) if u going with No leD its hard to show up.otherwise make the Back color Bright color.
(1) (0) Watch Unwatch