No products in the cart.
GPU Support Bracket, 4 long thread thumbscrews, a threaded bump stop holder, a short bump stop, and a long bump stop.
Optional: A-RGB remote (SATA Powered), Corsair iCUE cable, & Gigabyte Fusion VDG Cable
Share your thoughts!
Let us know what you think...
Only logged in customers who have purchased this product may leave a review. Log in now
What others are saying
We recommend installing the bump stop and routing/plugging in the LED cable (If RGB) before mounting the bracket for an easier installation. To mount the bump stop, choose which side you want to mount it on the bracket, put two of the thumb screws through the bump stop and bracket, and then screw it in by hand to the small rectangle pieces with two threaded holes. Next you will need to remove 2 screws from the PCIE Slot Covers at the rear of your case. Usually, this will be the 2 screws underneath the 2 that secure your Graphics Card to the case. For larger cards that take up 2.5 slots or more, you may need to use a lower slot. If your card needs to be mounted in a lower slot, use the taller bump stop. We recommend putting the support bracket up to where it will be mounted to visualize where the bump stop will be needed.
All our RGB Mod Parts come with this connector on the cable by default. See below options on how to power/control the LEDs.
Option 1 (Included): Connect the RGB Cable directly into your motherboards 3 Pin 5V RGB Header, Razer Chroma Addressable RGB Controller, EKWB D-RGB Loop Connect, or your own 5v 3Pin Controller. Make sure not to connect to a 12V 4 pin header, as that will kill the LEDs.
Option 2 (Optional/Sold Separately): To use the RF remote to control your LEDs simply connect the SATA Power Cable to any SATA Power cable from your power supply unit. Connect the other side to the LED connector.
Option 3 (Optional/Sold Separately): To use Corsair iCUE to control and power your LEDs, simply connect the Corsair iCUE cable adapter to the RGB Cable, and then plug the adapter into a Corsair Commander Pro, Node Pro, CORSAIR iCUE Commander CORE, or Commander Mini unit. Connect the other side to the LED connector. In Corsair iCUE’s software make sure to set the product to *2 LED STRIPS* as ours are denser!
Option 4 (Optional/Sold Separately): Connect to a Gigabyte/Aorus Motherboard Fusion 5V 3 Pin VDG Header. Connect the other side to the LED connector.
All orders are custom made to order in Dallas, TX USA!
Turnaround times are currently 15-20 business days due to the holiday demand, which does not include shipping times mentioned at checkout.
You will receive an automatic email with tracking once your package has shipped!
spcdurham (verified owner) on EVGA Spectrum RGB GPU Support Bracket –
This bracket not only removes the sag from my massive GPU but it looks amazing and works very well with the iCue software. Instead of thumbscrews, I was sent actual screws by mistake. I messaged the V1 support and they apologized and said they would send the proper thumbscrews immediately! I would definitely recommend this bracket for any build even if your GPU doesn’t sag; it will add a great looking aesthetic to your build!
(0) (0) Watch Unwatch
corey.harding0 (verified owner) on ROG Spectrum RGB GPU Support Bracket –
The bracket functions like a bracket should and does it’s job really well. Included screws are long enough to support not just the bracket but a PCI component as well (I’ve got a NIC sitting right behind it). Blows my mind that MoBo companies or GPU sellers don’t include something like this in the product package. Their loss is V1’s gain.
(0) (0) Watch Unwatch