Save/Share Design

A unique URL to save and share your design will be created for you...

Custom Design RGB GPU Support Bracket


$89.99


  • Everything is made to order here in Dallas, TX USA! Turnaround times are currently just 1-3 business days which does not include shipping times mentioned at checkout!


  • Our GPU Support Bracket was designed to remove sag from ANY GPU model in style! Supports 2-3 slot cards of any size and length. The support pieces can be mounted along with any point of the length and on either side of the bracket. All RGB Support Brackets include a 20 inch (50cm) long 5V 3Pin Addressable Header Cable.

    Support Bracket Dimensions: (10.32" or  260mm long by 1.6" or 40mm tall)

    Let us know which areas you want us to make glow RGB!

    • 19.99 $
    • 9.99 $

It's Black Friday in October! Get 50% OFF Today! Use Code b50 for 50% OFF at Checkout!

days
0
0
hours
0
3
minutes
4
3
seconds
0
0

GPU Support Bracket, 4 long thread thumbscrews, a threaded bump stop holder, a short bump stop, and a long bump stop.

Optional: A-RGB remote (SATA Powered), Corsair iCUE cable, & Gigabyte Fusion VDG Cable

Share your thoughts!

4.88 out of 5 stars

58 reviews

Let us know what you think...

Only logged in customers who have purchased this product may leave a review.

What others are saying

  1. One person found this helpful

    Corsair iCUE ELITE CAPELLIX pump cover

    wayner1991 (verified owner) on Custom Design AIO Cover for Corsair iCUE ELITE CAPELLIX (H100i, H115i, H150i) Black and White

    Quality is really good, matches my build really well and I love it. Only 2 little issues, the holes for the pump cover needs to be slightly bigger so the screws can sit flush, and hopefully there’s an option to select other postal service companies, other than these 2 issues, I’m loving it and happy with my order, shoutout to Griffin for helping me with my questions as well.

    (1) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. EVGA 3070 Backplate

    jtmechanic13 (verified owner) on Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs)

    Real nice quality and easy to understand installation. Did not expect the backplate to fit so perfectly to the GPU.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. One person found this helpful

    NZXT Custom AIO cover

    Felipe Garcia (verified owner) on Custom Design AIO Cover for NXT Kraken M22 X53 X63 X73 RGB 120,240,280, and 360mm

    I was under the impression it was more of an exact fit, but as long as its centered, it actually works pretty well the way it is.

    (1) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. One person found this helpful

    Amazing custom work

    Dominik Johnson (verified owner) on Custom Design RGB GPU Support Bracket

    I ordered 2 of these support brackets with one of them being custom made with their easy online editor and they look absolutely amazing in any computer. It brings a lot of light and the rgb really makes your graphics card shine! Really easy setup too!

    (1) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. Perfect Custom Backplate for GPU!

    ChefOctane (verified owner) on Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs)

    Firstly, the built-in editor on the custom product pages is amazing. It’s super easy to work with, and very straightforward. I knew I wanted to have a custom backplate with my logo on it, but didn’t have much design work outside of my logo. Luckily, V1 Tech has great background designs that worked out perfectly with my build. I had put off ordering for a long time thinking about the design, before finally pulling the trigger when I realized they have great abstract designs for the background.

    Secondly, the backplates are great quality, very easy to install, and look beautiful when all lit up. You can also see their custom PSU shroud cover, GPU support bracket, and a fan grill in my build as well 🙂

    Finally, their customer support couldn’t be any better! They were very responsive before ordering through text message, and very supportive throughout the process after the order was placed. If you’re concerned that they might not get something custom right, don’t be! They’ll reach out to you if something is missing or seems off (they reached out to me about the dimensions I entered which were wrong, and get it all updated before making them)!

    Couldn’t recommend it more if you’re wanting to make your system truly your own!

    More pics & Video: https://twitter.com/ChefOctane/status/1404467086823464965

    P.S. The install with the magnets is so easy that you may even consider getting multiple backplate designs to swap out every now and then 😉

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Continue as a Guest

Don't have an account? Sign Up

We recommend installing the bump stop and routing/plugging in the LED cable (If RGB) before mounting the bracket for an easier installation. To mount the bump stop, choose which side you want to mount it on the bracket, put two of the thumb screws through the bump stop and bracket, and then screw it in by hand to the small rectangle pieces with two threaded holes. Next you will need to remove 2 screws from the PCIE Slot Covers at the rear of your case. Usually, this will be the 2 screws underneath the 2 that secure your Graphics Card to the case. For larger cards that take up 2.5 slots or more, you may need to use a lower slot. If your card needs to be mounted in a lower slot, use the taller bump stop. We recommend putting the support bracket up to where it will be mounted to visualize where the bump stop will be needed.

All our RGB Mod Parts come with this connector on the cable by default. See below options on how to power/control the LEDs.

Option 1 (Included): Connect the RGB Cable directly into your motherboards 3 Pin 5V RGB Header, Razer Chroma Addressable RGB Controller, EKWB D-RGB Loop Connect, or your own 5v 3Pin Controller. Make sure not to connect to a 12V 4 pin header, as that will kill the LEDs.

Option 2 (Optional/Sold Separately): To use the RF remote to control your LEDs simply connect the SATA Power Cable to any SATA Power cable from your power supply unit. Connect the other side to the LED connector.

  

Option 3 (Optional/Sold Separately): To use Corsair iCUE to control and power your LEDs, simply connect the Corsair iCUE cable adapter to the RGB Cable, and then plug in the adapter into a Corsair Commander Pro or Corsair Node Pro unit. Connect the other side to the LED connector. In Corsair iCUE’s software make sure to set the product to *2 LED STRIPS* as ours are denser!

Option 4 (Optional/Sold Separately): Connect to a Gigabyte/Aorus Motherboard Fusion 5V 3 Pin VDG Header. Connect the other side to the LED connector.

 

All orders are custom made to order in Dallas, TX USA!

Our inventory is in stock and production has been scaled up a lot thanks to you! Turnaround times are currently under 7 days which does not include shipping times mentioned at checkout!

You will receive an automatic email with tracking once your package has shipped!

Watch the full “V1 Tech Custom Designer Guide” with real examples and see how it’s made!