Save/Share Design

A unique URL to save and share your design will be created for you...

Custom Design RGB GPU Support Bracket


$89.99 $49.99


  • Everything is made to order here in Dallas, TX USA! Holiday Turnaround times are about 7 business days which does not include shipping times mentioned at checkout!


  • Our GPU Support Bracket was designed to remove sag from ANY GPU model in style! Supports 2-3 slot cards of any size and length. The support pieces can be mounted along with any point of the length and on either side of the bracket. All RGB Support Brackets include a 20 inch (50cm) long 5V 3Pin Addressable Header Cable.

    Support Bracket Dimensions: (10.32" or  260mm long by 1.6" or 40mm tall)

    Let us know which areas you want us to make glow RGB!

    • 19.99 $
    • 9.99 $

CYBER WEEK SALE! UP TO 60% OFF! DISCOUNT ALREADY APPLIED!

days
0
0
hours
0
7
minutes
3
3
seconds
2
9

GPU Support Bracket, 4 long thread thumbscrews, a threaded bump stop holder, a short bump stop, and a long bump stop.

Optional: A-RGB remote (SATA Powered), Corsair iCUE cable, & Gigabyte Fusion VDG Cable

Share your thoughts!

4.88 out of 5 stars

60 reviews

Let us know what you think...

Only logged in customers who have purchased this product may leave a review.

What others are saying

  1. Excellent customer service.

    bcloudj256 (verified owner) on Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs)

    I ordered the custom design with text lighting. Due to a lack of explanation on what areas are less likely to shine. Part of my design just shows up blank. Though that’s an oversight on my part, but an email from the designer would have been a nice customer service on the company part. The issue I have is that the cable giving to me for the icue does not work right and after roughly a week of explaining they said they will mail me new cables. Well its has been over a week and I have not heard from the company at all or received new cables.

    The only reason I gave them 3 stars is because a friend order a custom backplate at roughly the same time and I see how nice their work can look. Unfortunately I received poor service and a lack luster backplate.

    Edit:
    V1tech reached out to me explaining there was an error with my shipment replacement. This was after my initial review. Errors happens, and I understand perfectly. Once the error was corrected and the miss communication. V1tech customer service was excellent and vary helpful. They even offer to take a look at my design and the lighting. As I mention the design was an over site on my part, and the lighting didn’t fully illuminate the bottom portion of the design well; especially the bottom text portion. I attached an image, and the camera can pick up a little bit more lighting on the “Fixation” portion of the board compared to the naked eye. Nothing on the fault of V1tech, because it’s my design, but mention to help future customer plan their designs better. When I upgrade my graphics card, I will differently be looking for a new customizable backplate from V1tech. I have changed my review from a 3 stars to 5 stars. V1tech did a great job working with me with my icue cabling/rgb strip issue for the backplate lighting.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. One person found this helpful

    Amazing team of people

    alexbrighthd (verified owner) on Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs)

    Having gone through fitment issues and even a lost (presumably stolen) package, the team at V1 Tech sent out three revisions before I finally was able to fit one in my build. They even let me keep the original one I ordered. After the lost package, I was really bummed out and told them not to worry about it. However, about 2 weeks later I got an email from them saying they sent a new one and it was delivered that day. I walked outside and sure enough it was in my mailbox! The final product has greatly exceeded my expectations, especially when I thought all custom designs were matte. Mine came glossy like I requested and looks absolutely phenomenal. Thanks for the fantastic support!

    Photo has been removed

    (1) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. looks so coool

    dreem12 (verified owner) on Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs)

    the Backplate i Ordered with Sombra Logo loooks sooo damn hot and the color with Remote is so easy to fix its a top notch .. Welldone V1 and ty.

    Photo has been removed

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. 4 out of 4 people found this helpful

    Looks so great

    dreem12 (verified owner) on Custom Design RGB Solid State Drive Cover Horizontal

    i did order a Sombra HDD and its look so nice in my pc the only issue is ( Dont order the back color Black ) if u going with No leD its hard to show up.otherwise make the Back color Bright color.

    (4) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. 1 out of 2 people found this helpful

    Re-Order your Custom Backplate NOW!

    nickraylive (verified owner) on Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs)

    If it’s been a while since you purchased a custom backplate, it may benefit you to place the order again; as some of the design processes have improved exponentially.

    The wiring of RGB Backplates has been re-engineered to a much higher quality standard. Not only “feeling” stronger, but providing direct support for Motherboard 5v RGB headers and Corsair iCUE RGB controllers; in addition to the standard RF SATA design of old.

    They have started rounding the corners of the acrylic and providing black painted magnets instead of the silver kind.

    But best of all, they use a single, slightly thicker sheet of acrylic and print the design on top instead of sandwiching the printed design in-between two thinner sheets. This not only makes for a sturdier finished product, but showcases the artwork more accurately as it now has a matte finish; allowing better color accuracy and preventing glare.

    (1) (1)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Continue as a Guest

Don't have an account? Sign Up

We recommend installing the bump stop and routing/plugging in the LED cable (If RGB) before mounting the bracket for an easier installation. To mount the bump stop, choose which side you want to mount it on the bracket, put two of the thumb screws through the bump stop and bracket, and then screw it in by hand to the small rectangle pieces with two threaded holes. Next you will need to remove 2 screws from the PCIE Slot Covers at the rear of your case. Usually, this will be the 2 screws underneath the 2 that secure your Graphics Card to the case. For larger cards that take up 2.5 slots or more, you may need to use a lower slot. If your card needs to be mounted in a lower slot, use the taller bump stop. We recommend putting the support bracket up to where it will be mounted to visualize where the bump stop will be needed.

All our RGB Mod Parts come with this connector on the cable by default. See below options on how to power/control the LEDs.

Option 1 (Included): Connect the RGB Cable directly into your motherboards 3 Pin 5V RGB Header, Razer Chroma Addressable RGB Controller, EKWB D-RGB Loop Connect, or your own 5v 3Pin Controller. Make sure not to connect to a 12V 4 pin header, as that will kill the LEDs.

Option 2 (Optional/Sold Separately): To use the RF remote to control your LEDs simply connect the SATA Power Cable to any SATA Power cable from your power supply unit. Connect the other side to the LED connector.

  

Option 3 (Optional/Sold Separately): To use Corsair iCUE to control and power your LEDs, simply connect the Corsair iCUE cable adapter to the RGB Cable, and then plug in the adapter into a Corsair Commander Pro or Corsair Node Pro unit. Connect the other side to the LED connector. In Corsair iCUE’s software make sure to set the product to *2 LED STRIPS* as ours are denser!

Option 4 (Optional/Sold Separately): Connect to a Gigabyte/Aorus Motherboard Fusion 5V 3 Pin VDG Header. Connect the other side to the LED connector.

 

All orders are custom made to order in Dallas, TX USA!

Our inventory is in stock and production has been scaled up a lot thanks to you! Turnaround times are currently under 7 days which does not include shipping times mentioned at checkout!

You will receive an automatic email with tracking once your package has shipped!

Watch the full “V1 Tech Custom Designer Guide” with real examples and see how it’s made!