Sorry, but the cart item could not be found!

Save/Share Design

A unique URL to save and share your design will be created for you...

Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs)


$119.99 $59.99


  • Everything is made to order here in Dallas, TX USA! Holiday Turnaround times are about 10 business days which does not include shipping times mentioned at checkout!


  • We can tailor any design to your exact GPU Model! If your card has a vent pass through for cooling, we will make a cutout for this so there is no effect on your GPUs temperatures. Mounting is made super simple with included double-sided tape and nonconductive magnets!

    All RGB Backplates include a 20 inch (50cm) long 5V 3Pin Addressable Header Cable.

    Let us know which areas you want us to make glow RGB! All areas will be made semi-transparent and backlit over our LED reactive white sublimation. We do not cut out or engrave areas to be clear anymore as it's not as bright as our new method. If you would like us to change the specific color area to white, please let us know, otherwise mention to keep the color of the specified area the same. 

    +$10 for each revision.

    • 19.99 $
    • 9.99 $
Or Check this box to Enter Your GPU Model Manually, Provide a link to your GPU, or Provide LxW dimensions

UP TO 60% OFF Cyber Week Sale! DISCOUNT ALREADY APPLIED!

days
0
0
hours
0
1
minutes
3
6
seconds
3
6

Our GPU Backplates have no effect on temps. Watch this video below by Tek Vibe with in-depth testing for more info!

1) To install your V1 Tech Custom Graphics Card Backplate, we recommend first removing the graphics card from your PC. 2) If you opt to use the provided magnets for an easily removable installation, first apply the provided double-sided tape to one side of the magnets by peeling the protective plastic on the tape and sticking the tape directly to the magnet. Place the magnets onto the tallest screws* on the back of your graphics card with the tape facing away from the graphics card. If a semi-permanent installation is desired, apply the provided double-sided tape directly to the tallest screws* on the back of your graphics card.

*Note: Ensure that as much surface area is covered as possible, start with the far corners of the graphics card and evenly distribute magnets/adhesive as you work inward to ensure that as much surface area is covered as possible for a secure installation.

3) Peel the protective plastic on the other side of the double-sided tape and position the V1 Tech Custom. Graphics Card Backplate directly over the rear of your graphics card (double-check to ensure that the backplate is oriented the correct way by aligning with any SLI or PCIe power cutouts if present. Press down firmly to secure in place. Install your graphics card into your system.

All our RGB Mod Parts come with this connector on the cable by default. See below options on how to power/control the LEDs.

Option 1 (Included): Connect the RGB Cable directly into your motherboards 3 Pin 5V RGB Header, Razer Chroma Addressable RGB Controller, EKWB D-RGB Loop Connect, or your own 5v 3Pin Controller. Make sure not to connect to a 12V 4 pin header, as that will kill the LEDs.

Option 2 (Optional/Sold Separately): To use the RF remote to control your LEDs simply connect the SATA Power Cable to any SATA Power cable from your power supply unit. Connect the other side to the LED connector.

  

Option 3 (Optional/Sold Separately): To use Corsair iCUE to control and power your LEDs, simply connect the Corsair iCUE cable adapter to the RGB Cable, and then plug in the adapter into a Corsair Commander Pro or Corsair Node Pro unit. Connect the other side to the LED connector. In Corsair iCUE’s software make sure to set the product to *2 LED STRIPS* as ours are denser!

Option 4 (Optional/Sold Separately): Connect to a Gigabyte/Aorus Motherboard Fusion 5V 3 Pin VDG Header. Connect the other side to the LED connector.

 

GPU Backplate, double-sided tape, and nonconductive magnets.

Optional: A-RGB remote(SATA Powered)/, Corsair iCUE cable, & Gigabyte Fusion VDG Cable

Share your thoughts!

4.88 out of 5 stars

60 reviews

Let us know what you think...

Only logged in customers who have purchased this product may leave a review.

What others are saying

  1. My logo

    babyboy4071986 (verified owner) on Custom Design AIO Cover for NXT Kraken M22 X53 X63 X73 RGB 120,240,280, and 360mm

    I ordered my logo to go on my build it came out good but i have to reorder do to me using wrong color code but all in all nice work only thing I wish is if it came with a template to help center the cover on the aio
    If interested in the complete build here’s a link https://pcpartpicker.com/b/RHdmP6

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. Very cool looking

    darkflame.fire (verified owner) on Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs)

    looks great will definitely use them again, i did a custom design. Will next time not use a completely white background for the picture but it still looks great. I say look at all the designs they have first, they have a lot of great ones, will buy one of those for my next build. super easy to install and works great with RGBFusion software as well.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. Amazing!

    redfox_11 (verified owner) on Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs)

    Super easy to install, no problems working with Armoury crate software either, colours come out so nice and really bring the build together

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. THE Dragon plate

    zapoqx (verified owner) on Custom Design RGB GPU Support Bracket

    This was truly a wonder to make thanks to one of my friends. The nice label for my system that is also in part honor of a late close friend of mine and you guys did it justice. It is sturdy feeling and defintiely holds up. Now whenever my GPU gets replaced, I give it a nice GPU backplace and it will be golden!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. Love it!

    tammy.woods (verified owner) on Custom Design RGB Solid State Drive Cover Vertical

    Absolutely in love with both of my ssd custom covers 🙂 I am already trying to figure out my next one ! Thank you guys ! Looking forward to business with ya’ll again in future

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Continue as a Guest

Don't have an account? Sign Up

All orders are custom made to order in Dallas, TX USA!

Our inventory is in stock and production has been scaled up a lot thanks to you! Turnaround times are currently under 7 days which does not include shipping times mentioned at checkout!

You will receive an automatic email with tracking once your package has shipped!

Watch the full “V1 Tech Custom Designer Guide” with real examples and see how it’s made!