No products in the cart.
GPU Backplate, double-sided tape, and nonconductive magnets.
Optional: A-RGB remote(SATA Powered)/, Corsair iCUE cable, & Gigabyte Fusion VDG Cable
Share your thoughts!
Let us know what you think...
Only logged in customers who have purchased this product may leave a review. Log in now
What others are saying
1) To install your V1 Tech Custom Graphics Card Backplate, we recommend first removing the graphics card from your PC. 2) If you opt to use the provided magnets for an easily removable installation, first apply the provided double-sided tape to one side of the magnets by peeling the protective plastic on the tape and sticking the tape directly to the magnet. Place the magnets onto the tallest screws* on the back of your graphics card with the tape facing away from the graphics card. If a semi-permanent installation is desired, apply the provided double-sided tape directly to the tallest screws* on the back of your graphics card.
*Note: Ensure that as much surface area is covered as possible, start with the far corners of the graphics card and evenly distribute magnets/adhesive as you work inward to ensure that as much surface area is covered as possible fora secure installation.
3) Peel the protective plastic on the other side of the double-sided tape and position the V1 Tech Custom. Graphics Card Backplate directly over the rear of your graphics card (double-check to ensure that the backplate is oriented the correct way by aligning with any SLI or PCIe power cutouts if present. Press down firmly to secure in place. Install your graphics card into your system.
All our RGB Mod Parts come with this connector on the cable by default. See below options on how to power/control the LEDs.
Option 1 (Included): Connect the RGB Cable directly into your motherboards 3 Pin 5V RGB Header, Razer Chroma Addressable RGB Controller, EKWB D-RGB Loop Connect, or your own 5v 3Pin Controller. Make sure not to connect to a 12V 4 pin header, as that will kill the LEDs.
Option 2 (Optional/Sold Separately): To use the RF remote to control your LEDs simply connect the SATA Power Cable to any SATA Power cable from your power supply unit. Connect the other side to the LED connector.
Option 3 (Optional/Sold Separately): To use Corsair iCUE to control and power your LEDs, simply connect the Corsair iCUE cable adapter to the RGB Cable, and then plug in the adapter into a Corsair Commander Pro or Corsair Node Pro unit. Connect the other side to the LED connector. In Corsair iCUE’s software make sure to set the product to *2 LED STRIPS* as ours are denser!
Option 4 (Optional/Sold Separately): Connect to a Gigabyte/Aorus Motherboard Fusion 5V 3 Pin VDG Header. Connect the other side to the LED connector.
All orders are custom made to order in Dallas, TX USA!
Our inventory is in stock and production has been scaled up a lot thanks to you! Turnaround times are currently under 7 days which does not include shipping times mentioned at checkout!
You will receive an automatic email with tracking once your package has shipped!
GPU Backplate, double-sided tape, and nonconductive magnets.
Optional: A-RGB remote(SATA Powered)/, Corsair iCUE cable, & Gigabyte Fusion VDG Cable
Share your thoughts!
Let us know what you think...
Only logged in customers who have purchased this product may leave a review. Log in now
What others are saying
Amazing Quality
V1 Tech smashed it out of the park with the Custom Design CPU Backplate I ordered. The LED strip is super bright, the custom print on the backplate is perfect, and super vibrant. So happy with this product, if you want to take your PC build to the next level, a custom design is the way to go!
(0) (0) Watch
Shinobu Backplate
Perfect finishing touch to my themed build. I was pleasantly surprised how well it fit given the clearance constraints of my case. Diffusion for the LEDs would have been nice but the finished product is exactly what I had hoped for!
(0) (0) Watch
Worth The Wait
I want to begin with that I love this GPU backplate and it’s gorgeous! There was some initial worry, do to some YouTube videos of the backplate not being the correct size or shape but the one I ordered fits perfectly. The art on the backplate is fantastic.
When installing the backplate I had no issue and even if instructions are ignored, it appears a novice could install the backplate.
The only issue I have is that it took over a month to get more order. That is no fault of the company itself but more of the fault of the current pandemic and issues with weather.
(0) (0) Watch
1) To install your V1 Tech Custom Graphics Card Backplate, we recommend first removing the graphics card from your PC. 2) If you opt to use the provided magnets for an easily removable installation, first apply the provided double-sided tape to one side of the magnets by peeling the protective plastic on the tape and sticking the tape directly to the magnet. Place the magnets onto the tallest screws* on the back of your graphics card with the tape facing away from the graphics card. If a semi-permanent installation is desired, apply the provided double-sided tape directly to the tallest screws* on the back of your graphics card.
*Note: Ensure that as much surface area is covered as possible, start with the far corners of the graphics card and evenly distribute magnets/adhesive as you work inward to ensure that as much surface area is covered as possible fora secure installation.
3) Peel the protective plastic on the other side of the double-sided tape and position the V1 Tech Custom. Graphics Card Backplate directly over the rear of your graphics card (double-check to ensure that the backplate is oriented the correct way by aligning with any SLI or PCIe power cutouts if present. Press down firmly to secure in place. Install your graphics card into your system.
All our RGB Mod Parts come with this connector on the cable by default. See below options on how to power/control the LEDs.
Option 1 (Included): Connect the RGB Cable directly into your motherboards 3 Pin 5V RGB Header, Razer Chroma Addressable RGB Controller, EKWB D-RGB Loop Connect, or your own 5v 3Pin Controller. Make sure not to connect to a 12V 4 pin header, as that will kill the LEDs.
Option 2 (Optional/Sold Separately): To use the RF remote to control your LEDs simply connect the SATA Power Cable to any SATA Power cable from your power supply unit. Connect the other side to the LED connector.
Option 3 (Optional/Sold Separately): To use Corsair iCUE to control and power your LEDs, simply connect the Corsair iCUE cable adapter to the RGB Cable, and then plug in the adapter into a Corsair Commander Pro or Corsair Node Pro unit. Connect the other side to the LED connector. In Corsair iCUE’s software make sure to set the product to *2 LED STRIPS* as ours are denser!
Option 4 (Optional/Sold Separately): Connect to a Gigabyte/Aorus Motherboard Fusion 5V 3 Pin VDG Header. Connect the other side to the LED connector.
All orders are custom made to order in Dallas, TX USA!
Our inventory is in stock and production has been scaled up a lot thanks to you! Turnaround times are currently under 7 days which does not include shipping times mentioned at checkout!
You will receive an automatic email with tracking once your package has shipped!
skunk616 (verified owner) on Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs) –
V1 Tech smashed it out of the park with the Custom Design CPU Backplate I ordered. The LED strip is super bright, the custom print on the backplate is perfect, and super vibrant. So happy with this product, if you want to take your PC build to the next level, a custom design is the way to go!
(0) (0) Watch Unwatch
joseph.erdy (verified owner) on Shinobu RGB GPU Backplate –
Perfect finishing touch to my themed build. I was pleasantly surprised how well it fit given the clearance constraints of my case. Diffusion for the LEDs would have been nice but the finished product is exactly what I had hoped for!
(0) (0) Watch Unwatch
joshhutton11 (verified owner) on Goku RGB GPU Backplate –
Perfect addition to my Ultra Instinct Goku build. Totally worth the wait!
(0) (0) Watch Unwatch
danielgrey94 (verified owner) on Soul of the Mask RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs) –
it met beyond my expectations!
(0) (0) Watch Unwatch
Calli Mayotte (verified owner) on City of Dreams RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs) –
I want to begin with that I love this GPU backplate and it’s gorgeous! There was some initial worry, do to some YouTube videos of the backplate not being the correct size or shape but the one I ordered fits perfectly. The art on the backplate is fantastic.
When installing the backplate I had no issue and even if instructions are ignored, it appears a novice could install the backplate.
The only issue I have is that it took over a month to get more order. That is no fault of the company itself but more of the fault of the current pandemic and issues with weather.
(0) (0) Watch Unwatch