Our GPU Backplates have no effect on temps. Watch this video below by Tek Vibe with in-depth testing for more info!
1) To install your V1 Tech Custom Graphics Card Backplate, we recommend first removing the graphics card from your PC. 2) If you opt to use the provided magnets for an easily removable installation, first apply the provided double-sided tape to one side of the magnets by peeling the protective plastic on the tape and sticking the tape directly to the magnet. Place the magnets onto the tallest screws* on the back of your graphics card with the tape facing away from the graphics card. If a semi-permanent installation is desired, apply the provided double-sided tape directly to the tallest screws* on the back of your graphics card.
*Note: Ensure that as much surface area is covered as possible, start with the far corners of the graphics card and evenly distribute magnets/adhesive as you work inward to ensure that as much surface area is covered as possible for a secure installation.
3) Peel the protective plastic on the other side of the double-sided tape and position the V1 Tech Custom. Graphics Card Backplate directly over the rear of your graphics card (double-check to ensure that the backplate is oriented the correct way by aligning with any SLI or PCIe power cutouts if present. Press down firmly to secure in place. Install your graphics card into your system.
All our RGB Mod Parts come with this connector on the cable by default. See below options on how to power/control the LEDs.
Option 1 (Included): Connect the RGB Cable directly into your motherboards 3 Pin 5V RGB Header, Razer Chroma Addressable RGB Controller, EKWB D-RGB Loop Connect, or your own 5v 3Pin Controller. Make sure not to connect to a 12V 4 pin header, as that will kill the LEDs.
Option 2 (Optional/Sold Separately): To use the RF remote to control your LEDs simply connect the SATA Power Cable to any SATA Power cable from your power supply unit. Connect the other side to the LED connector.
Option 3 (Optional/Sold Separately): To use Corsair iCUE to control and power your LEDs, simply connect the Corsair iCUE cable adapter to the RGB Cable, and then plug in the adapter into a Corsair Commander Pro or Corsair Node Pro unit. Connect the other side to the LED connector. In Corsair iCUE’s software make sure to set the product to *2 LED STRIPS* as ours are denser!
Option 4 (Optional/Sold Separately): Connect to a Gigabyte/Aorus Motherboard Fusion 5V 3 Pin VDG Header. Connect the other side to the LED connector.
GPU Backplate, double-sided tape, and nonconductive magnets.
Optional: A-RGB remote(SATA Powered)/, Corsair iCUE cable, & Gigabyte Fusion VDG Cable
Share your thoughts!
Let us know what you think...
Only logged in customers who have purchased this product may leave a review. Log in now
What others are saying
All orders are custom made to order in Dallas, TX USA!
Our inventory is in stock and production has been scaled up a lot thanks to you! Turnaround times are currently under 7 days which does not include shipping times mentioned at checkout!
You will receive an automatic email with tracking once your package has shipped!
Our GPU Backplates have no effect on temps. Watch this video below by Tek Vibe with in-depth testing for more info!
1) To install your V1 Tech Custom Graphics Card Backplate, we recommend first removing the graphics card from your PC. 2) If you opt to use the provided magnets for an easily removable installation, first apply the provided double-sided tape to one side of the magnets by peeling the protective plastic on the tape and sticking the tape directly to the magnet. Place the magnets onto the tallest screws* on the back of your graphics card with the tape facing away from the graphics card. If a semi-permanent installation is desired, apply the provided double-sided tape directly to the tallest screws* on the back of your graphics card.
*Note: Ensure that as much surface area is covered as possible, start with the far corners of the graphics card and evenly distribute magnets/adhesive as you work inward to ensure that as much surface area is covered as possible for a secure installation.
3) Peel the protective plastic on the other side of the double-sided tape and position the V1 Tech Custom. Graphics Card Backplate directly over the rear of your graphics card (double-check to ensure that the backplate is oriented the correct way by aligning with any SLI or PCIe power cutouts if present. Press down firmly to secure in place. Install your graphics card into your system.
All our RGB Mod Parts come with this connector on the cable by default. See below options on how to power/control the LEDs.
Option 1 (Included): Connect the RGB Cable directly into your motherboards 3 Pin 5V RGB Header, Razer Chroma Addressable RGB Controller, EKWB D-RGB Loop Connect, or your own 5v 3Pin Controller. Make sure not to connect to a 12V 4 pin header, as that will kill the LEDs.
Option 2 (Optional/Sold Separately): To use the RF remote to control your LEDs simply connect the SATA Power Cable to any SATA Power cable from your power supply unit. Connect the other side to the LED connector.
Option 3 (Optional/Sold Separately): To use Corsair iCUE to control and power your LEDs, simply connect the Corsair iCUE cable adapter to the RGB Cable, and then plug in the adapter into a Corsair Commander Pro or Corsair Node Pro unit. Connect the other side to the LED connector. In Corsair iCUE’s software make sure to set the product to *2 LED STRIPS* as ours are denser!
Option 4 (Optional/Sold Separately): Connect to a Gigabyte/Aorus Motherboard Fusion 5V 3 Pin VDG Header. Connect the other side to the LED connector.
GPU Backplate, double-sided tape, and nonconductive magnets.
Optional: A-RGB remote(SATA Powered)/, Corsair iCUE cable, & Gigabyte Fusion VDG Cable
Share your thoughts!
Let us know what you think...
Only logged in customers who have purchased this product may leave a review. Log in now
What others are saying
-
Perfect Custom Backplate for GPU!
Firstly, the built-in editor on the custom product pages is amazing. It’s super easy to work with, and very straightforward. I knew I wanted to have a custom backplate with my logo on it, but didn’t have much design work outside of my logo. Luckily, V1 Tech has great background designs that worked out perfectly with my build. I had put off ordering for a long time thinking about the design, before finally pulling the trigger when I realized they have great abstract designs for the background.
Secondly, the backplates are great quality, very easy to install, and look beautiful when all lit up. You can also see their custom PSU shroud cover, GPU support bracket, and a fan grill in my build as well 🙂
Finally, their customer support couldn’t be any better! They were very responsive before ordering through text message, and very supportive throughout the process after the order was placed. If you’re concerned that they might not get something custom right, don’t be! They’ll reach out to you if something is missing or seems off (they reached out to me about the dimensions I entered which were wrong, and get it all updated before making them)!
Couldn’t recommend it more if you’re wanting to make your system truly your own!
More pics & Video: https://twitter.com/ChefOctane/status/1404467086823464965
P.S. The install with the magnets is so easy that you may even consider getting multiple backplate designs to swap out every now and then 😉
(0) (0) Watch
-
Absolutely Perfect - Just as I had imagined
This backplate ended up being absolutely gorgeous and v1Tech seriously took my thoughts an imaginations to life, it was cut exactly to my gpu size and all I had to do was tell that what size my gpu was. It was an incredibly easy install with the magnets and adhesive tape that comes with it. It is seriously gorgeous and 10/10 would recommend.
(0) (0) Watch
-
-
-
Near Perfection
The backplate looks great! My only changes I would make are having the magnets pre-adhered to the backplate (you enter your exact model during checkout, seems like something that could be done, or at least add an option to pay for it) and that the lighting strip is very clearly visible from the top (back?) of the backplate. Would be nice if a diffuser was added or more, smaller LEDs along the entire back of the card.
Overall, still a fantastic product.
(0) (0) Watch
All orders are custom made to order in Dallas, TX USA!
Our inventory is in stock and production has been scaled up a lot thanks to you! Turnaround times are currently under 7 days which does not include shipping times mentioned at checkout!
You will receive an automatic email with tracking once your package has shipped!
ChefOctane (verified owner) on Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs) –
Firstly, the built-in editor on the custom product pages is amazing. It’s super easy to work with, and very straightforward. I knew I wanted to have a custom backplate with my logo on it, but didn’t have much design work outside of my logo. Luckily, V1 Tech has great background designs that worked out perfectly with my build. I had put off ordering for a long time thinking about the design, before finally pulling the trigger when I realized they have great abstract designs for the background.
Secondly, the backplates are great quality, very easy to install, and look beautiful when all lit up. You can also see their custom PSU shroud cover, GPU support bracket, and a fan grill in my build as well 🙂
Finally, their customer support couldn’t be any better! They were very responsive before ordering through text message, and very supportive throughout the process after the order was placed. If you’re concerned that they might not get something custom right, don’t be! They’ll reach out to you if something is missing or seems off (they reached out to me about the dimensions I entered which were wrong, and get it all updated before making them)!
Couldn’t recommend it more if you’re wanting to make your system truly your own!
More pics & Video: https://twitter.com/ChefOctane/status/1404467086823464965
P.S. The install with the magnets is so easy that you may even consider getting multiple backplate designs to swap out every now and then 😉
(0) (0) Watch Unwatch
toddymcbuckets35 (verified owner) on Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs) –
This backplate ended up being absolutely gorgeous and v1Tech seriously took my thoughts an imaginations to life, it was cut exactly to my gpu size and all I had to do was tell that what size my gpu was. It was an incredibly easy install with the magnets and adhesive tape that comes with it. It is seriously gorgeous and 10/10 would recommend.
(0) (0) Watch Unwatch
eg0re80.jv (verified owner) on Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs) –
I love the clean look it gives the back of my Asus 1080
(0) (0) Watch Unwatch
Steven Richmond (verified owner) on Soul of the Fire Power RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs) –
It was super easy to install and looks great. Easily integrated with Corsair iCue
(0) (0) Watch Unwatch
Anthony Salvati (verified owner) on Star Samurai RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs) –
The backplate looks great! My only changes I would make are having the magnets pre-adhered to the backplate (you enter your exact model during checkout, seems like something that could be done, or at least add an option to pay for it) and that the lighting strip is very clearly visible from the top (back?) of the backplate. Would be nice if a diffuser was added or more, smaller LEDs along the entire back of the card.
Overall, still a fantastic product.
(0) (0) Watch Unwatch