Save/Share Design

A unique URL to save and share your design will be created for you...

Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs)


$119.99



  • We can tailor any design to your exact GPU Model! If your card has a vent pass through for cooling, we will make a cutout for this so there is no effect on your GPUs temperatures. Mounting is made super simple with included double-sided tape and nonconductive magnets!

    All RGB Backplates include a 20 inch (50cm) long 5V 3Pin Addressable Header Cable.

    Let us know which areas you want us to make glow RGB! All areas will be made semi-transparent and backlit over our LED reactive white sublimation. We do not cut out or engrave areas to be clear anymore as it's not as bright as our new method. If you would like us to change the specific color area to white, please let us know, otherwise mention to keep the color of the specified area the same. 

    +$10 for each revision.

    • 19.99 $
    • 9.99 $
Or Check this box to Enter Your GPU Model Manually, Provide a link to your GPU, or Provide LxW dimensions

Our GPU Backplates have no effect on temps. Watch this video below by Tek Vibe with in-depth testing for more info!

1) To install your V1 Tech Custom Graphics Card Backplate, we recommend first removing the graphics card from your PC. 2) If you opt to use the provided magnets for an easily removable installation, first apply the provided double-sided tape to one side of the magnets by peeling the protective plastic on the tape and sticking the tape directly to the magnet. Place the magnets onto the tallest screws* on the back of your graphics card with the tape facing away from the graphics card. If a semi-permanent installation is desired, apply the provided double-sided tape directly to the tallest screws* on the back of your graphics card.

*Note: Ensure that as much surface area is covered as possible, start with the far corners of the graphics card and evenly distribute magnets/adhesive as you work inward to ensure that as much surface area is covered as possible for a secure installation.

3) Peel the protective plastic on the other side of the double-sided tape and position the V1 Tech Custom. Graphics Card Backplate directly over the rear of your graphics card (double-check to ensure that the backplate is oriented the correct way by aligning with any SLI or PCIe power cutouts if present. Press down firmly to secure in place. Install your graphics card into your system.

All our RGB Mod Parts come with this connector on the cable by default. See below options on how to power/control the LEDs.

Option 1 (Included): Connect the RGB Cable directly into your motherboards 3 Pin 5V RGB Header, Razer Chroma Addressable RGB Controller, EKWB D-RGB Loop Connect, or your own 5v 3Pin Controller. Make sure not to connect to a 12V 4 pin header, as that will kill the LEDs.

Option 2 (Optional/Sold Separately): To use the RF remote to control your LEDs simply connect the SATA Power Cable to any SATA Power cable from your power supply unit. Connect the other side to the LED connector.

  

Option 3 (Optional/Sold Separately): To use Corsair iCUE to control and power your LEDs, simply connect the Corsair iCUE cable adapter to the RGB Cable, and then plug in the adapter into a Corsair Commander Pro or Corsair Node Pro unit. Connect the other side to the LED connector. In Corsair iCUE’s software make sure to set the product to *2 LED STRIPS* as ours are denser!

Option 4 (Optional/Sold Separately): Connect to a Gigabyte/Aorus Motherboard Fusion 5V 3 Pin VDG Header. Connect the other side to the LED connector.

 

GPU Backplate, double-sided tape, and nonconductive magnets.

Optional: A-RGB remote(SATA Powered)/, Corsair iCUE cable, & Gigabyte Fusion VDG Cable

Share your thoughts!

4.88 out of 5 stars

41 reviews

Let us know what you think...

Only logged in customers who have purchased this product may leave a review.

What others are saying

  1. Great backplate and amazing customer service

    angelfuentes917 (verified owner) on Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs)

    I love this backplate and how it adds so much to my build. When I first received it, the first backplate was originally too big and I contacted customer support and they were so helpful with the process. I received a new backplate and it fit perfectly for my card. I would recommend this if you are looking to add flare to your pc. Also it shipped out pretty fast.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. The Final Touch

    kyle12345275 (verified owner) on Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs)

    This was the perfect final touch to my PC. I couldn’t be happier with my backplate. Phenominal product!

    Stoked to have my @V1Tech custom backplates installed in Martini! They came out PERFECT! pic.twitter.com/WcTiky9oKS— Kyle Seifert (@Jesushoovy) August 23, 2020

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. One person found this helpful

    Perfection!! but be careful when you order

    robertip4895 (verified owner) on Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs)

    Amazing product and makes my PC pop! But make sure you read everything when you order especially if its custom! I thought I was going to get a black background but to my dismay that was not a default! Totally my fault! And I will probably purchase another one to fit my case theme a little better! Thank you V1 Tech!

    Photo has been removed

    (1) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. Just amazed on how it turned out!

    falcondb44 (verified owner) on Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs)

    Everything was made to spec!!! Just what I needed to complete my build!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. One person found this helpful

    Love it

    deandreromon (verified owner) on Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs)

    Came in a timely fashion and looks great. This is my first pc that I’ve built and I’m going for a bleach theme and this is a great start.

    Photo has been removed

    (1) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Continue as a Guest

Don't have an account? Sign Up

All orders are custom made to order in Dallas, TX USA!

Our inventory is in stock and production has been scaled up a lot thanks to you! Turnaround times are currently under 7 days which does not include shipping times mentioned at checkout!

You will receive an automatic email with tracking once your package has shipped!

Watch the full “V1 Tech Custom Designer Guide” with real examples and see how it’s made!