Save/Share Design

A unique URL to save and share your design will be created for you...

Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs)


$119.99



  • We can tailor any design to your exact GPU Model! If your card has a vent pass through for cooling, we will make a cutout for this so there is no effect on your GPUs temperatures. Mounting is made super simple with included double-sided tape and nonconductive magnets!

    All RGB Backplates include a 20 inch (50cm) long 5V 3Pin Addressable Header Cable.

    Let us know which areas you want us to make glow RGB! All areas will be made semi-transparent and backlit over our LED reactive white sublimation. We do not cut out or engrave areas to be clear anymore as it's not as bright as our new method. If you would like us to change the specific color area to white, please let us know, otherwise mention to keep the color of the specified area the same. 

    +$10 for each revision.

    • 19.99 $
    • 9.99 $
Or Check this box to Enter Your GPU Model Manually, Provide a link to your GPU, or Provide LxW dimensions

Get 40% OFF for Prime Day! Use Code: PRIME at Checkout! Ends 6-22 at Midnight CST

Our GPU Backplates have no effect on temps. Watch this video below by Tek Vibe with in-depth testing for more info!

1) To install your V1 Tech Custom Graphics Card Backplate, we recommend first removing the graphics card from your PC. 2) If you opt to use the provided magnets for an easily removable installation, first apply the provided double-sided tape to one side of the magnets by peeling the protective plastic on the tape and sticking the tape directly to the magnet. Place the magnets onto the tallest screws* on the back of your graphics card with the tape facing away from the graphics card. If a semi-permanent installation is desired, apply the provided double-sided tape directly to the tallest screws* on the back of your graphics card.

*Note: Ensure that as much surface area is covered as possible, start with the far corners of the graphics card and evenly distribute magnets/adhesive as you work inward to ensure that as much surface area is covered as possible for a secure installation.

3) Peel the protective plastic on the other side of the double-sided tape and position the V1 Tech Custom. Graphics Card Backplate directly over the rear of your graphics card (double-check to ensure that the backplate is oriented the correct way by aligning with any SLI or PCIe power cutouts if present. Press down firmly to secure in place. Install your graphics card into your system.

All our RGB Mod Parts come with this connector on the cable by default. See below options on how to power/control the LEDs.

Option 1 (Included): Connect the RGB Cable directly into your motherboards 3 Pin 5V RGB Header, Razer Chroma Addressable RGB Controller, EKWB D-RGB Loop Connect, or your own 5v 3Pin Controller. Make sure not to connect to a 12V 4 pin header, as that will kill the LEDs.

Option 2 (Optional/Sold Separately): To use the RF remote to control your LEDs simply connect the SATA Power Cable to any SATA Power cable from your power supply unit. Connect the other side to the LED connector.

  

Option 3 (Optional/Sold Separately): To use Corsair iCUE to control and power your LEDs, simply connect the Corsair iCUE cable adapter to the RGB Cable, and then plug in the adapter into a Corsair Commander Pro or Corsair Node Pro unit. Connect the other side to the LED connector. In Corsair iCUE’s software make sure to set the product to *2 LED STRIPS* as ours are denser!

Option 4 (Optional/Sold Separately): Connect to a Gigabyte/Aorus Motherboard Fusion 5V 3 Pin VDG Header. Connect the other side to the LED connector.

 

GPU Backplate, double-sided tape, and nonconductive magnets.

Optional: A-RGB remote(SATA Powered)/, Corsair iCUE cable, & Gigabyte Fusion VDG Cable

Share your thoughts!

4.9 out of 5 stars

49 reviews

Let us know what you think...

Only logged in customers who have purchased this product may leave a review.

What others are saying

  1. my gpu rgb backplate

    badguy3225 (verified owner) on Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs)

    all i have to say is i love it i will be ordering another one soon

    Photo has been removed

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. custom fallout backplate

    travisrjames24 (verified owner) on Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs)

    love my new fallout backplate. V1 tech did an awesome job of making it just like i wanted and i had it within 2 weeks. syncs up great with the rest of my asus aura sync.

    Photo has been removed

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. Custom Final Fantasy 7 GPU Backplate

    vang_stephen (verified owner) on Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs)

    Great quality and the process was pretty fast considering that these are custom made. I will definitely be ordering more custom GPU backplates for my next theme build(s). Thanks, V1 Tech.

    Final Fantasy 7 Theme Setup

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. Trial and Error

    festrada (verified owner) on Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs)

    After some trial and error on my end the guys were finally able to take my request to seal conduit from touch other surface on my motherboard. I fried about 2 led strips and tried to fix it myself. Sent a request to the guys and they help my situation. Turns out I may have been to rough with led on installs. Honestly idk what the heck happened but they helped all the way. Super happy now! Appreciate y’all

    Photo has been removed

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. Fantastic and quick work

    sgumbs1994 (verified owner) on Custom Design RGB GPU Backplate Custom Made for ANY Graphics Card Model now with Vent Cut Outs and ARGB (Addressable LEDs)

    Shout out to V1tech’s team for making this a smooth, virtually seamless process. Had my order done about a week after making it and I am nothing short of impressed. Thank you once again!

    Photo has been removed

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Continue as a Guest

Don't have an account? Sign Up

All orders are custom made to order in Dallas, TX USA!

Our inventory is in stock and production has been scaled up a lot thanks to you! Turnaround times are currently under 7 days which does not include shipping times mentioned at checkout!

You will receive an automatic email with tracking once your package has shipped!

Watch the full “V1 Tech Custom Designer Guide” with real examples and see how it’s made!