PSU Shroud Side Covers

Showing 1–24 of 247 results

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

    +$10 for each revision.

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

    +$10 for each revision.

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

    +$10 for each revision.

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

    +$10 for each revision.

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

    +$10 for each revision.

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

    +$10 for each revision.

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

    +$10 for each revision.

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

    +$10 for each revision.

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

    +$10 for each revision.

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

    +$10 for each revision.

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

    +$10 for each revision.

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

    +$10 for each revision.

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

    +$10 for each revision.

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

    +$10 for each revision.

  • Turnaround times are now 1-2 weeks which does not include shipping times mentioned at checkout! Everything is made to order here in Dallas, TX USA! 

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

    +$10 for each revision.

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

    +$10 for each revision.

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

    +$10 for each revision.

  • Turnaround times are now 1-2 weeks which does not include shipping times mentioned at checkout! Everything is made to order here in Dallas, TX USA! 

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

    +$10 for each revision.

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

    +$10 for each revision.

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

    +$10 for each revision.

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

    +$10 for each revision.

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

    +$10 for each revision.

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

    +$10 for each revision.

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

    +$10 for each revision.

  • Turnaround times are now 1-2 weeks which does not include shipping times mentioned at checkout! Everything is made to order here in Dallas, TX USA!