Case Panels

Showing 1–24 of 1442 results

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

-45%
  • Turnaround times are now 1-2 weeks which does not include shipping times mentioned at checkout! Everything is made to order here in Dallas, TX USA! 


    Let us know which areas you want us to make glow RGB! All areas will be made semi-transparent and backlit over our LED reactive white sublimation. We do not cut out or engrave areas to be clear anymore as it's not as bright as our new method. If you would like us to change the specific color area to white, please let us know, otherwise mention to keep the color of the specified area the same. 

    +$10 for each revision.

-36%
  • Turnaround times are now 1-2 weeks which does not include shipping times mentioned at checkout! Everything is made to order here in Dallas, TX USA! 


    Let us know which areas you want us to make glow RGB! All areas will be made semi-transparent and backlit over our LED reactive white sublimation. We do not cut out or engrave areas to be clear anymore as it's not as bright as our new method. If you would like us to change the specific color area to white, please let us know, otherwise mention to keep the color of the specified area the same. 

    +$10 for each revision.

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

-45%

  • This plate is made to fit perfectly for the rear of your Lian Li PC-O11 Dynamic Computer Case. We use a sandblasted Cast Acrylic Plexi Glass that is 3/16" thick or 4.5mm and is machined to have a dense side-emitting LED strip across the front integrated into the panel. We use a UV LED Reactive Dye Sublimation to apply the graphic to the material allowing for a backlit art with unique effects like never before seen. Mounting is made super simple with included double-sided tape. The 3Pin Addressable RGB Header Cable is routed around the side and comes out the back so it can be easily cable managed.

  • Turnaround times are now 1-2 weeks which does not include shipping times mentioned at checkout! Everything is made to order here in Dallas, TX USA! 

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

-45%

  • This plate is made to fit perfectly for the rear of your Lian Li PC-O11 Dynamic Computer Case. We use a sandblasted Cast Acrylic Plexi Glass that is 3/16" thick or 4.5mm and is machined to have a dense side-emitting LED strip across the front integrated into the panel. We use a UV LED Reactive Dye Sublimation to apply the graphic to the material allowing for a backlit art with unique effects like never before seen. Mounting is made super simple with included double-sided tape. The 3Pin Addressable RGB Header Cable is routed around the side and comes out the back so it can be easily cable managed.

  • Turnaround times are now 1-2 weeks which does not include shipping times mentioned at checkout! Everything is made to order here in Dallas, TX USA! 

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

-45%

  • This plate is made to fit perfectly for the rear of your Lian Li PC-O11 Dynamic Computer Case. We use a sandblasted Cast Acrylic Plexi Glass that is 3/16" thick or 4.5mm and is machined to have a dense side-emitting LED strip across the front integrated into the panel. We use a UV LED Reactive Dye Sublimation to apply the graphic to the material allowing for a backlit art with unique effects like never before seen. Mounting is made super simple with included double-sided tape. The 3Pin Addressable RGB Header Cable is routed around the side and comes out the back so it can be easily cable managed.

  • Turnaround times are now 1-2 weeks which does not include shipping times mentioned at checkout! Everything is made to order here in Dallas, TX USA! 

-45%

  • This plate is made to fit perfectly for the rear of your Lian Li PC-O11 Dynamic Computer Case. We use a sandblasted Cast Acrylic Plexi Glass that is 3/16" thick or 4.5mm and is machined to have a dense side-emitting LED strip across the front integrated into the panel. We use a UV LED Reactive Dye Sublimation to apply the graphic to the material allowing for a backlit art with unique effects like never before seen. Mounting is made super simple with included double-sided tape. The 3Pin Addressable RGB Header Cable is routed around the side and comes out the back so it can be easily cable managed.

  • Turnaround times are now 1-2 weeks which does not include shipping times mentioned at checkout! Everything is made to order here in Dallas, TX USA! 

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)

  • Turnaround times are now 1-2 weeks which does not include shipping times mentioned at checkout! Everything is made to order here in Dallas, TX USA! 

-45%

  • This plate is made to fit perfectly for the rear of your Lian Li PC-O11 Dynamic Computer Case. We use a sandblasted Cast Acrylic Plexi Glass that is 3/16" thick or 4.5mm and is machined to have a dense side-emitting LED strip across the front integrated into the panel. We use a UV LED Reactive Dye Sublimation to apply the graphic to the material allowing for a backlit art with unique effects like never before seen. Mounting is made super simple with included double-sided tape. The 3Pin Addressable RGB Header Cable is routed around the side and comes out the back so it can be easily cable managed.

  • Turnaround times are now 1-2 weeks which does not include shipping times mentioned at checkout! Everything is made to order here in Dallas, TX USA! 

-29%

  • This plate is made to fit perfectly for the bottom of your Lian Li PC-O11 Dynamic Computer Case. We use a sandblasted Cast Acrylic Plexi Glass that is 3/16" thick or 4.5mm and is machined to have a dense side-emitting LED strip across the bottom integrated into the panel. We use a UV LED Reactive Dye Sublimation to apply the graphic to the material allowing for a backlit art with unique effects like never before seen. Mounting is made super simple with included double-sided tape. The 3Pin Addressable RGB Header Cable is routed around the side and comes out the back so it can be easily cable managed.

  • Turnaround times are now 1-2 weeks which does not include shipping times mentioned at checkout! Everything is made to order here in Dallas, TX USA! 

-38%
  • Our PSU Shroud Side Covers are designed to mount on top of your existing PSU Shrouds using included double-sided tape. The Addressable RGB LEDs run along the top 1/2" and the cable comes out the top right corner. You can mount these plates on top of the shroud cover, on the right side of your motherboard tray, and to cover drive cags. Create your own design and we will tailor it to best fit the dimensions provided! 

    Max Length 20" (50.5cm)

    Max Height 6" (15cm)